What causes the Gas Valve Control internal blocking in my REMEHA Boiler?
If Gas Valve Control internal blocking occurred in your REMEHA Boiler, it could be due to: * Security kernel error: Restart the boiler. * CU-GH PCB issue: Replace the CU-GH PCB.
What should I do if the return temperature sensor is shorted or measures a high temperature on my REMEHA Quinta Ace 160?
If the return temperature sensor is either shorted or measures a temperature above range in your REMEHA Boiler, it could be due to: * Return temperature sensor short-circuited: Bad connection: check the wiring and connectors. * Incorrectly fitted sensor: check that the sensor has been correctly fitted. * Faulty sensor: replace the sensor.
What does it mean when the Gas Valve Control unit communication exceeds feedback time on my REMEHA Boiler?
If the Gas Valve Control unit communication has exceeded the feedback time in your REMEHA Boiler, it could be due to: * Communication error with the security kernel: Restart the boiler. * CU-GH PCB issue: Replace the CU-GH PCB.
What does Configuration Error mean on my REMEHA Quinta Ace 160 Boiler?
If a Configuration Error occurs on your REMEHA Boiler, it indicates a configuration error or unknown configuration number. To resolve this, reset CN1 and CN2.
What to do if the heat exchanger temperature sensor is shorted or measures a high temperature in my REMEHA Quinta Ace 160 Boiler?
If the heat exchanger temperature sensor is either shorted or measures a temperature above range in your REMEHA Boiler, it could be due to: * Heat exchanger temperature sensor short-circuited: Bad connection: check the wiring and connectors. * Incorrectly fitted sensor: check that the sensor has been correctly fitted. * Faulty sensor: replace the sensor.
What does it mean if a deviation in flue sensor 1 and flue sensor 2 is detected on my REMEHA Quinta Ace 160?
If a deviation in flue sensor 1 and flue sensor 2 is detected in your REMEHA Boiler, it could be due to: * Flue gas temperature sensor deviation: Bad connection: check the connection. * Faulty sensor: replace the sensor.
What does it mean when there is a Blocking Input of the Control Unit from device external environment on my REMEHA Quinta Ace 160 Boiler?
If there is a Blocking Input of the Control Unit from device external environment in your REMEHA Boiler, it could be due to: * Blocking input is active: External cause: remove external cause. * Wrong parameter set: check the parameters.
What causes the flue gas temperature to exceed the maximum operating value in a REMEHA Quinta Ace 160?
If the flue gas temperature has exceeded the maximum operating value in your REMEHA Boiler, it could be due to: * Maximum flue gas temperature exceeded: Check the flue gas outlet system. * Heat exchanger issues or faulty sensor: Check the heat exchanger to ensure that the flue gas side is not clogged and replace the sensor if it's faulty.
Why does my REMEHA Quinta Ace 160 have 5 unsuccessful burner starts?
If the REMEHA Boiler detects 5 unsuccessful burner starts, it could be due to: * No ignition spark: Check the wiring between the CU-GH PCB and the ignition transformer. * Ionisation/ignition electrode issues: Check for breakdown to earth. * Burner cover condition: Check the condition of the burner cover and the earthing SU PCB; replace the SU PCB if faulty. * Ignition spark but no flame: Vent the gas pipes to remove air.
Why has the flow temperature exceeded the maximum operating value in my REMEHA Quinta Ace 160 Boiler?
If the flow temperature has exceeded the maximum operating value in your REMEHA Boiler, it could be due to: * A flow temperature sensor above normal range (high-limit thermostat): Check the wiring and connectors for bad connections. * No flow or insufficient flow: Check the circulation (direction, pump, valves), water pressure, and the cleanliness of the heat exchanger.
General| Model | Quinta Ace 160 |
|---|---|
| Category | Boiler |
| Output Power | 160 kW |
| Max. Heat Output (80/60°C) | 160 kW |
| Modulation Range | 32 - 160 kW |
| Type | Condensing Boiler |
| Output | 160 kW |
| Warranty | 2 years |
| Fuel Type | Natural Gas |
| Fuel | Natural Gas |
General safety instructions for installers and end-users concerning gas and flue gas.
Additional safety guidelines and information relevant to the installation and use of the boiler.
Explains various danger levels and symbols used throughout the manual for user safety.
Provides detailed technical specifications including heat output, gas/flue gas data, and electrical characteristics.
Illustrates the physical dimensions and connection points of the boiler.
Regulations and warnings for installers concerning the boiler installation process.
Guidance on safe lifting procedures for the boiler, recommending the use of lifting aids.
Instructions and warnings for correctly mounting the boiler to the wall.
Steps for connecting the central heating circuit, expansion vessel, and condensate drain.
Procedures for making electrical connections, including the control unit and connection box.
Step-by-step guide for initial boiler setup and start-up program verification.
Instructions for adjusting gas type and checking/setting combustion parameters.
Explains how to use the control panel, including symbols and menu navigation.
Procedures for safely shutting down the boiler for extended periods.
Guide on navigating the installer menu and modifying boiler parameters.
Detailed list and description of various parameters for configuration and adjustment.
Routine checks and maintenance tasks to ensure proper boiler function.
Explanation of different error code levels (Warning, Blocking, Lock-out) and their meanings.
A checklist of tasks to be performed during the boiler's initial commissioning.
A checklist for performing annual inspection and servicing of the boiler.
To Next Page