REMEHA Quinta Ace 160 Service Manual (English)

Questions and Answers:

A
Angel WilliamsSep 2, 2025
Why is there a maximum temperature difference between the heat exchanger and return in my REMEHA Quinta Ace 160 Boiler?
- X
  xdavisSep 2, 2025
  If there's a maximum difference between the heat exchanger temperature and return temperature in your REMEHA Boiler, it could be due to: * No flow or insufficient flow: Check the circulation (direction, pump, valves), water pressure, the cleanliness of the heat exchanger, and ensure the installation has been correctly vented to remove air. * Sensor error: Check that the sensors are operating correctly and that the sensor has been fitted properly.
T
torresnicholasSep 2, 2025
What causes the maximum heat exchanger temperature increase to be exceeded in a REMEHA Quinta Ace 160?
- P
  Patricia WadeSep 3, 2025
  If the maximum heat exchanger temperature increase has been exceeded in your REMEHA Boiler, it could be due to: * No flow or insufficient flow: Check the circulation (direction, pump, valves), water pressure, the cleanliness of the heat exchanger, and ensure the central heating system has been correctly vented to remove air. * Sensor error: Check that the sensors are operating correctly and that the sensor has been fitted properly.
F
Frank RobbinsSep 3, 2025
What to do if the flow temperature sensor is removed or measures a low temperature in my REMEHA Boiler?
- J
  jerry42Sep 3, 2025
  If the flow temperature sensor is either removed or measures a temperature below range in your REMEHA Boiler, it could be due to: * Flow temperature sensor open: Bad connection: check the wiring and connectors. * Faulty sensor: replace the sensor.
R
Ryan RamirezSep 3, 2025
What to do if the flow temperature sensor is shorted or measures a high temperature in my REMEHA Quinta Ace 160?
- C
  Christopher ButlerSep 4, 2025
  If the flow temperature sensor is either shorted or measures a temperature above range in your REMEHA Boiler, it could be due to: * Flow temperature sensor short circuited: Bad connection: check the wiring and connectors. * Incorrectly fitted sensor: check that the sensor has been correctly fitted. * Faulty sensor: replace the sensor.

REMEHA Quinta Ace 160 Specifications

General

Model	Quinta Ace 160
Category	Boiler
Output Power	160 kW
Max. Heat Output (80/60°C)	160 kW
Modulation Range	32 - 160 kW
Type	Condensing Boiler
Output	160 kW
Warranty	2 years
Fuel Type	Natural Gas
Fuel	Natural Gas