1
A
NU760_1_G3-FRA.qxd 9/11/05 17:18 Page 3.44
SLEEPSAFE HEADREST
3.44
Depending on the vehicle, the child
headrests are fitted to the rear side
seats (for a normal chassis) or the
side seats in the second row of rear
seats (for a long chassis).
To adjust the height
Pull the headrest towards you and
simultaneously slide it to the
recommended height (see Figure A).
To remove the headrest
Press tabs 1 and raise the headrest to
remove it.
To refit the headrest
Insert the headrest rods into the
sleeves, with the notches to the
front, and lower the headrest to the
desired height.
The headrest is a safety
component, check that it
is fitted and in the correct
position.
The headrest is only
approved for vehicles in
which it was originally
fitted.
It must not be fitted into another
vehicle under any circumstances.
NU760_1_G3-ENG.qxp 27-Dec-05 18:41 Page 3.44 (Black/Process Black plate)
To Next Page
Loading...
