2.93
ENG_UD77931_2
Régulateur de vitesse adaptatif (XFK - Renault)
STOP AND GO ADAPTIVE CRUISE CONTROL (3/14)
8
11
10
9
Displays
8 Stop and Go adaptive cruise con-
trol warning light.
9 Vehicle in front.
10 Stored safe distance
11 Stored cruising speed.
Switching on
Press switch 5.
Warning light
appears in grey, and
the message “Adaptive Cruise Ctl ON”
appears on the instrument panel, ac-
companied by dashes to indicate that
the cruise control function is activated
and waiting to store a cruising speed.
This function cannot be activated when:
– the parking brake is applied;
– the Park Assist function is already
activated ➥ 2.133.
The message “Adaptive Cruise Ctl una-
vailable” is displayed on the instrument
panel.
Activating cruise control
When the vehicle is stationary or
moving at a steady speed (for all ve-
hicles), press switch 6 (SET/-) or 7
(RES/+) to activate the function and
store the current speed. The minimum
cruising speed is 19 mph (30 km/h).
Important: you should keep
your feet near the pedals at
all times to prepare for any
event.
The cruising speed 11 replaces the
dashes and the cruise control function
is confirmed by the display of the cruis-
ing speed in green along with the
warning light. If you try to activate the
function while the vehicle is moving at
a speed over 84 mph (135 km/h), the
message “Invalid Speed” is displayed
and the function remains deactivated.
Once a cruising speed is memorised
and the cruise control function is active,
you may lift your foot off the accelera-
tor pedal.
If your vehicle speed is lower than
about 19 mph (30 km/h), the func-
tion uses a default cruising speed of
19 mph (30 km/h). The vehicle will
accelerate until it reaches the stored
cruising speed.
To Next Page
