Renault Kangoo - Rear Seats: Standard Chassis Version

rear seats...................................................
(up to the end of the DU)
3.41
ENG_UD82596_1
Siège arrière: version châssis standard (XFK - Renault)
Rear seats : Standard chassis version
REAR SEATS : Standard chassis version (1/3)
To move the seats forwards
or backwards
Lift lever 1 to unlock the seat. Once in
the desired position, release the lever
and check that the seat is correctly
locked.
To fold down the seatback
(flat-floor position)
Seatback A or B may be folded down
onto the seat base to create a flat-floor
position:
– before handling, make sure that the
front seats are far enough forward;
– make sure that no devices are con-
nected to the accessories socket 5;
– attach the seat belt to the hook 3 to
avoid damaging it;
– remove the rear headrests 4;
– move the seat backwards to lock it;
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
When moving the rear
seats, ensure that nothing
obstructs the anchorage
points (passenger’s arm or
leg, a pet, gravel, cloth, toys, etc.).
– pull the lever 2 of the seatback that
you wish to fold down and lower it as
far as possible.
Make sure the seat is correctly locked
in position.
To raise the seatback
Make sure that the seat belt is correctly
positioned. You must pull the handle 2,
then grab the seatback and raise it.
Check that the bonnet is correctly
locked.
1
2
A
B
3
4
5