5.9
ENG_UD81076_2
Outils (XFK - Renault)
Storage position A in the tool
kit 1
Reposition the tools in the casing and
check that the assembly is correctly
positioned (not doing so may result in
noise).
TOOLS (2/2)
A
1
9
Do not leave the tools un-
secured inside the vehicle
as they may come loose
under braking. After use,
ensure that the tools are correctly
placed in their support, positioned
correctly in their housing, attach the
strap 9, then make sure that the tool
kit access flap is properly locked.
Risk of injury.
If bolts are supplied with the emer-
gency spare wheel, you must use
these bolts only for the emergency
spare wheel.
The jack is designed for wheel
changing purposes only. Under no
circumstances should it be used for
carrying out repairs underneath the
vehicle or to gain access to the un-
derside of the vehicle.
Nothing should be placed
around the driver’s feet
as such objects may slide
under the pedals during
sudden braking manoeuvres and
obstruct their use.
To Next Page
Loading...
