TRIP COMPUTER
2
Getting to know your vehicle - 125
Operating fault messages
These appear with the warning light to inform you that you should drive very carefully to an approved dealer
as soon as possible. If you fail to follow this recommendation, you risk damaging your vehicle.
They disappear when the display selection key is pressed or after several seconds and are stored in the computer log. The
warning light stays on. Examples of operating fault messages are given in the following pages.
Examples of mes
sages
Interpreting the display selected
"Check vehicle" Indicates a fault in one of the pedal sensors, battery management system or oil level sensor.
"Check airbag" Indicates a fault in the restraint system in addition to the seat belts. In the event of an accident, it is
possible that they may not be triggered.
"Check Postcolli
sion"
Indicates a problem with the multi-collision braking.
"Check emission
control"
– Indicates a fault in the vehicle's particle filter system.
– Indicates a fault in the emissions reduction system when it is accompanied by the warning
light.
"Check electrical sys
tem"
Indicates a fault in the traction system.