INFORMATION ABOUT THE VEHICLE
7
Technical specifications - 375
Vehicle identification plates
The information shown on the vehi
cle identification plate should be
quoted on all correspondence or or
ders.
The presence and location of the in
formation depends on the vehicle.
Identification plate
A
1.
Manufacturer name.
2.
EC design number or approval
number.
3.
Identification number.
Depending on the vehicle, this infor
mation is also provided on marking
B
.
4.
MMAC (Maximum Permissible All-
up Weight).
5.
MTR (Gross Train Weight: vehicle
fully loaded, with trailer).
6.
MMTA (Maximum Permissible
Weight) on front axle.
7.
MMTA on rear axle.
8.
Reserved for related or additional
entries.
9.
Not used.
10.
Paint reference (colour code).
Technical Information for the
emergency services
To Next Page
Loading...
