Renault RAFALE - Additional Driving Aid Functions

ADDITIONAL DRIVING AID FUNCTIONS
3
Driving - 195
My Safety
The "My Safety" function can be used
to deactivate or activate a set of driver
assistance functions simultaneously.
Depending on the vehicle, you can
configure the "My Safety" function from
the multimedia screen by selecting the
driving aid functions to be switched off
as a group.
Operation
"All ON" mode
Dependingonthevehicle,thefunc-
tionsandconfigurationsofdrivingas-
sistance concerned are:
– overspeed sound alert 🡺229;
– lane departure prevention🡺196;
– driver vigilance warning 🡺227;
– emergencylanedeparturepreven-
tion 🡺203.
When the "All ON" mode is activated:
the indicator light on the button 1 lights
up and the "My Safety All ON selected"
messageisdisplayedontheinstru-
ment panel to confirm this. The driving
aids that are available in the mode are
activated.
"Custom" mode
You can use this mode to deactivate
or reactivate certain driving aids that
areavailableinthe"AllON"modepre-
viously configured using the "MY
SAFETY PERSO" setting.
With the ignition on, press the switch 1
twice in quick succession. On the first
press, the "Press again for My Safety
Custom" message is displayed on the
instrument panel. On the second
press, the warning light on the switch
1 goes out. The "Custom"modeisac-
tivated. The "MySafetyPersoselect-
ed"messageisdisplayedonthein-
strument panel.
To switch back to "All ON" mode,
press once on the button 1 .Theindi-
cator light on the button 1 lights up.
Depending on the length of
time following the last time
the engine was stopped,
the alerts are reactivated:
– when the vehicle is unlocked;
or
– when a door is opened;
or
– when the engine is restarted.
Perso mode configuration
From the multimedia screen 2