EasyManua.ls Logo

Renault RAFALE - Page 195

Renault RAFALE
406 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DRIVER CORRECTION DEVICES AND AIDS
3
Driving - 193
If the warninglightisdis-
playedontheinstrumentpanel,ac-
companiedbythe"Steeringfault"mes-
sage, this indicates a system fault.
requires you to
stop as soon as traffic
conditions allow. Call an
approved dealer.
An impact to the underside of the
vehicle (e.g. striking a post, raised
kerb or other street furniture) may
result in damage to the vehicle
(e.g.: deformation of an axle).
To avoid any risk of accident,
have your vehicle checked by an
approved dealer.
Chassis control
The "Chassis control" system allows
the rigidity of the suspension (variable
suspension) to be adapted according
to the driving conditions.
Depending on the setting and the
MULTI-SENSE mode selected 🡺301
thesystemchangesfromamoresup-
ple suspension (Comfort) to a more
rigid suspension (Sport).
Three operating modes are available:
Comfort;
Dynamic;
Sport.
If the visibility is sufficient, the camera
1
detectsupcomingobstaclestoen-
ables the system to anticipate and
adapt the adjustments required to
maintain good road holding.
Note: make sure the windscreen is not
obscured(dirt,mud,snow,condensa-
tion etc.).
Multi-collision braking
Multi-collision braking reduces the risk
ofanadditionalcollisionafteranacci-
dentbytemporarilybringingyourvehi-
cle to a standstill.
Operating principle
Whentheairbagsystemdetectsacol-
lision, the pretensioners or airbags are
triggered 🡺85 and the "Multi-collision
braking"functionactivatestheElec-
tronic Stability Program (ESC) to brake
the vehicle.
Multi-collision braking is deactivated
during operation if:
the driver presses the accelerator
pedal firmly;
and/or
the braking force generated by the
driver pressing the brake pedal is
greater than the force produced by the
automatic braking triggered by the
function.
Note: multi-collision braking requires
the proper functioning of your vehicle's
braking system.
Operating faults
When the system detects an operating
fault,the"CheckPost-collision"mes-
sage and the warning light
are displayed on the instrument panel.
Inthiscase,thefunctionisdeactivat-
ed. Consult an approved dealer.

Table of Contents

Related product manuals