RL78/G13 APPENDIX A REVISION HISTORY
R01UH0146EJ0100 Rev.1.00 1068
Sep 22, 2011
(7/7)
Page Description Classification
CHAPTER 22 SAFETY FUNCTIONS
Though out
Change of all (c)
CHAPTER 23 REGULATOR
p. 920
Change of 23.1 Regulator Overview and Table 23-1. Regulator Output Voltage Conditions (c)
CHAPTER 24 OPTION BYTE
p. 921
Change of description in 24.1.1 User option byte (000C0H to 000C2H/010C0H to 010C2H) (c)
p. 923
Change of caution in Figure 24-1. Format of User Option Byte (000C0H/010C0H) (c)
p. 924, 925
Change of Figure 24-2. Format of User Option Byte (000C1H/010C1H) (1/2) (c)
p. 926
Change of Figure 24-3. Format of Option Byte (000C2H/010C2H) (c)
CHAPTER 25 FLASH MEMORY
p. 931
Change of Table 25-1. Wiring Between RL78/G13 and Dedicated Flash Memory Programmer (c)
p. 932
Change of 25.1.2 Communication Mode (c)
p. 934
Change of description in 25.2.2 Communication Mode (c)
p. 937, 938
Change of description in 25.4.1 Data flash overview (c)
p. 939
Change of description in 25.4.3 Procedure for accessing data flash memory (c)
p. 941
Change of description in 25.5.2 Flash memory programming mode (c)
p. 944
Addition of 25.5.5 Description of signature data (c)
p. 946
Change of Table 25-12. Setting Security in Each Programming Mode (c)
p. 951
Change of Table 25-14. Relationship between Flash Shield Window Function Setting/Change
Methods and Commands
(c)
CHAPTER 26 ON-CHIP DEBUG FUNCTION
p. 954
Change of Figure 26-2. Memory Spaces Where Debug Monitor Programs Are Allocated (c)
CHAPTER 28 INSTRUCTION SET
p. 958
Change of description and deletion of remark in CHAPTER 28 INSTRUCTION SET (c)
p. 962 to 978
Change of 28.2 Operation List (c)
CHAPTER 29 ELECTRICAL SPECIFICATIONS
Though out
Addition of caution for pins of each products (c)
p. 980, 981
Change of 29.2 Absolute Maximum Ratings (b), (c)
p. 983
Change of 29.3.2 On-chip oscillator characteristics (b), (c)
p. 985 to 987
Addition of 29.3.4 Recommended Oscillator Constants (b), (c)
p. 988 to 992
Change of 29.4.1 Pin characteristics (b), (c)
p. 993 to
1005
Change of 29.4.2 Supply current characteristics (b), (c)
p. 1006
Change of 29.5.1 Basic operation (b), (c)
p. 1008 to
1030
Change of 29.6.1 Serial array unit (b), (c)
p. 1032 to
1035
Change of 29.7.1 A/D converter characteristics (b), (c)
p. 1036
Change of 29.7.2 Temperature sensor characteristics and 29.7.3 POR circuit characteristics (b), (c)
p. 1039
Change of Supply Voltage Rise Time (b), (c)
p. 1040
Change of 29.8 Data Memory STOP Mode Low Supply Voltage Data Retention
Characteristics and 29.9 Flash Memory Programming Characteristics
(b), (c)
p. 1041
Change of 29.10 Timing Specs for Switching Modes (b), (c)
CHAPTER 30 PACKAGE DRAWINGS
Though out
Addition of CHAPTER 30 PACKAGE DRAWINGS (b), (c)
Remark “Classification” in the above table classifies revisions as follows.
(a): Error correction, (b): Addition/change of specifications, (c): Addition/change of description or note,
(d): Addition/change of package, part number, or management division, (e): Addition/change of related
documents
To Next Page
Loading...
Need help?
General
