Renishaw NC4+ Blue - Page 49

6.5
Parts list
Item Part number Description
Air blast solenoid
kit
A-5299-2933 Solenoid valve kit to control air supply to the integral air blast.
Air blast nozzle
replacement kit
A-6270-0395 Air blast nozzle assembly and tting tool.
Blanking plug M-6270-0398 Blanking plug to put in place of air blast nozzle.
Blanking plug kit A-6270-0399 Blanking plug, tting tool and hexagonal key.
NC4 tool kit A-4114-4110 Pin spanner, hexagonal wrenches (2 mm, 2.5 mm and
3mm), bootlace ferrule (× 12), cleaning swab (× 2), cleaning
tool, orientation tool.
Rotary cover M-4114-0130 Manually rotatable cover to block the laser beam.
NC4 set-up tool A-4114-8000 Battery operated tool used for setting up the NC4 system.
Battery P-BT03-0007 Battery for NC4 set-up tool.
Air assembly kit A-6435-4000 Filter/drier/regulator
Variety of pneumatic ttings:
Ø0.125 in (× 2)
Ø0.250 in (× 2)
Ø4.0 mm (× 2)
Ø6.0 mm (× 2)
Equal tee tting P-PF04-0010 Ø4.0 mm (0.16 in) push-t pneumatic adaptor.
Straight tting
Ø6.0 mm (0.24in)
to Ø6.0 mm
(0.24in)
P-PE02-0295 Ø6.0 mm (0.24 in) to Ø6.0 mm (0.24 in) push-t pneumatic
adaptor.
Straight tting
Ø6.0 mm (0.24in)
to Ø4.0 mm
(0.16in)
P-PE02-0388 Ø6.0 mm (0.24 in) to Ø4.0 mm (0.16 in) push-t pneumatic
adaptor.
Straight tting
Ø4.0 mm (0.16in)
to Ø4.0 mm
(0.16in)
P-PE02-0020 Ø4.0 mm (0.16 in) to Ø4.0 mm (0.16 in) push-t pneumatic
adaptor.
Straight tting
Ø4.0 mm (0.16
in) to Ø3.0 mm
(0.12in)
P-PE02-0019 Ø4.0 mm (0.16 in) to Ø3 mm (0.12 in) push-t .pneumatic
adaptor.
Air lter service kit M-3060-0933 Replacement lter and seals for air lter/regulator unit.
Membrane drier
service kit
M-3060-0943 Replacement membrane cartridge and dew point indicator.
Locknut P-NU03-0200 Locknut, M20 × 1.5P, for use with GP11 and GP16 cable/
conduit glands.