Renishaw RTS User Manual

CAUTIONS:
Do not leave dead batteries in the probe.
When changing batteries, do not allow coolant or debris to enter the battery compartment.
Ensure the product is clean and dry before inserting batteries.
When changing batteries, check that the battery polarity is correct.
Take care to avoid damaging the battery compartment gasket.
Only use specied batteries.
1
2
4
3
NOTES:
After removing the old batteries, wait more than 5seconds before inserting the new batteries.
Do not mix new and used batteries or battery types, as this will result in reduced life and damage to
the batteries.
Always ensure that the cassette gasket and mating surfaces are clean and free from dirt before
reassembly.
If dead batteries are inadvertently inserted, the LEDs will remain a constant red.
CAUTION: Dispose of exhausted batteries in accordance with local regulations. Never dispose of
batteries in a re.
5.2
Maintenance
Changing the batteries

Renishaw RTS Specifications

General

Brand	Renishaw
Model	RTS
Category	Tools
Language	English