To Next Page

To Previous Page

7.1

Item Part number Description

RTS (QE) A-5646-0001 RTS (QE) probe with disc stylus, AA alkaline batteries, tools

and support card. Set to trigger filter off.

Disc stylus A-2008-0382 Disc stylus (tungsten carbide, 75 Rockwell C) Ø12.7 mm

(Ø0.5 in).

Square stylus A-2008-0384 Square tip stylus (ceramic tip, 75 Rockwell C)

19.05 mm × 19.05 mm (0.75 in × 0.75 in).

Break stem kit A-5003-5171 Stylus protection kit comprising: break stem (× 1),

captivelink(× 1), support bar (× 1), M4 screw (× 2),

M4grubscrew (× 3), hexagon keys: 2 mm (× 1), 3mm(×1)

and spanner 5 mm (× 1).

Stylus holder kit A-2008-0389 Stylus holder kit comprising stylus holder and screws.

AA battery P-BT03-0005 AA battery – alkaline – supplied as standard with probe (pack

of two).

AA battery P-BT03-0008 AA battery – lithium-thionyl chloride (pack of two).

Battery cap A-5401-0301 RTS battery cap assembly.

Seal A-4038-0301 Battery housing seal.

Tool kit A-5401-0300 Kit comprising : break stem (× 1), captive link (× 2),

supportbar(× 1), M4 screw (× 2), M4 grub screw (× 3),

spirolpin (× 2), hexagon keys: 2 mm A/F (× 1),

2.5 mm A/F (× 1), 3 mm A/F (× 1), 4 mm A/F (× 1) and

spanner 5 mm A/F (× 1).

RMI-Q A-5687-0049 RMI-Q (side exit) with 8 m (26.2 ft) cable, tools and support

card.

RMI-Q A-5687-0050 RMI-Q (side exit) with 15 m (49.2 ft) cable, tools and support

card.

RMI-QE A-6551-0049 RMI-QE with 8 m (26.2 ft) cable, tools and support card.

RMI-QE A-6551-0050 RMI-QE with 15 m (49.2 ft) cable, tools and support card.

RMI-Q mounting

bracket

A-2033-0830 RMI-Q mounting bracket with xing screws, washers and nuts.

RMI-QE mounting

bracket

A-6551-0120 RMI-QE mounting bracket with xing screws, washers and

nuts.

Parts list

see Section 7,“Parts list”

Renishaw RTS User Manual

Questions and Answers: