20 Network configuration
Renkforce PL500D WiFi
4 Network configuration
The PL500D WiFi has a built-in configuration interface that can be called up
using a standard web browser. Most settings for operating the device can be
modified here.
4.1 Calling up the built-in configuration interface
Call up the built-in online configuration interface under Start -> All Programs
-> PLC -> Access Manager.
4.2 Menu description
All menu functions are described in the corresponding interface as well as in
the associated chapter in the manual. The sequence of the description in the
manual follows the structure of the menu.
• Cl
ick Save to save the settings of the respective area of the configuration
interface.
• C
lick Back to leave the respective area of the configuration interface.
• Select the de
sired language in the language selection list.
The four central areas of the configuration
interface are displayed on the left
edge. Click the button of an area to move directly into it.
• In the Status overview area, you get general information about all con-
nected HomePlug, Wi-Fi and LAN devices.
• You can change or
modify the various device settings for security, network,
HomePlug and time under Device configuration.
• You can
change or modify Wi-Fi settings in the WLAN configuration area.
• The Management section is for resetting, securing and restoring your indi-
vidual configurations. In addition, you can update the firmware of you
r
PL500D WiFi here.
4.3 Status overview
In the Status overview area you can track the status of your connected PLC,
Wi-Fi and LAN devices.
To Next Page
Loading...
Need help?
General
