Renkforce PL500D WiFi User Manual

Network configuration 23
Renkforce PL500D WiFi
4.4.3 PLC settings
In a PLC network, all connected components must use the same password.
The PLC password can be defined with the PLC encryption button (see 'Con-
figuring the PLC network'), by using the configuration soft
ware or at this loca-
tion in the configuration interface. You
can choose to configure the password
locally or for the entire ("Total") network.
If you only change the password for a local device,
you exclude it from your
complete PLC network.
The PLC default password is HomePlugAV.
4.4.4 Time server
A time server is a server on the Internet whose task consists of providing the
exact time.
The option Retrieve date and time automatically is activated by default so
that the PL500D WiFi can automatically synchronise the date and time.
Select your Time zone and the Time server. If you have enabled the option
Adjust to daylight saving time automatically, the PL500D WiFi automati-
cally adjusts to daylight saving time.
Synchronisation with an Internet time server has to be ensured in order to use
the Wi-Fi time control, for example (see 'WLAN time control'). In addition, the
time server has to be activated, and an active
Internet connection is also
required.
4.4.5 LED settings
The LED status display can be deactivated by activating the function Disable
all LEDs permantly in order to prevent unwanted ligh
ting, for example, in the
master bedroom.
The LED status display is activated in the factory default state.
4.5 WLAN configuration
In the WLAN configuration area, you can configure settings for the Wi-Fi net-
work and its security.

Renkforce PL500D WiFi Specifications

General

Brand	Renkforce
Model	PL500D WiFi
Category	Adapter
Language	English