Renkforce RF100 XL - C) Operating Instructions; D) Software; 6 Features and Functions

7
• Load the conguration le in "Cura" to print an object using the corresponding material (see “e) Loading conguration
les (Windows
®
)” on page 52 for details).
The contents of this folder are not displayed on the control panel. These cong les are recommended for
use with the supplied laments. You can also use "Cura" to create your own conguration les.
c) Operating instructions
• The quick start guide is saved to the "Manual" folder.
The contents of this folder are not displayed on the control panel.
d) Software
• The "Software" folder contains the Windows
®
and Mac OS installation les for the "Cura" software and the
necessary USB drivers.
The contents of this folder are not displayed on the control panel.
6. Features and functions
• Fully assembled and ready-to-use 3D printer
• Max. size of the printed object: 200 x 200 x 200 mm
• High-precision extruder with 0.4 mm nozzle
• Colour touchscreen control panel
• Works with a computer (via USB) or an SD card/USB stick
• Supports printing from an SD card, PC and USB stick
• Manually-congurable printer parameters
• Extremely stable metal design
• Suitable for 1.75 mm PLA, wood, copper, elastic, glow-in-the-dark and thermocolour laments (for item no.
1592620, 1592461) and ABS laments (for item no. 1592461)
• Over 100 ready-to-use 3D models
• Includes "Cura" software