EN
138
10.2 • Other
The following error code appears if the connection with the ventilator unit is terminated:
Press any key to remove the error code and to access the main control
menu. Please contact your installer if the same problem keeps on
occurring.
The TouchDisplay does not require any specific maintenance.
It is sufficient to clean the display with a microfiber cloth. Pay attention not to scratch the
surface!
Make sure that the openings at both top and bottom are not exposed to water.
Never clean the TouchDisplay with detergent or substances containing solvents.
They could damage the display.
11 • Cleaning and maintenance
To Next Page
Loading...
Need help?
General