ResMed AIRCurve 10 S User Manual

English 3

About the control panel
Start/Stop button
Press to start/stop therapy.
Press and hold for three seconds to enter power save
mode.
Dial
Turn to navigate the menu and press to select an option.
Turn to adjust a selected option and press to save your
change.
Home button Press to return to the Home screen.
Different icons may be displayed on the screen at different times including:
Ramp Time Wireless signal strength (green)
Humidity Wireless transfer not enabled (gray)
Humidifier warming No wireless connection
Humidifier cooling Airplane Mode

ResMed AIRCurve 10 S Specifications

General

Operating Mode	S (Spontaneous)
Ramp Time	0 to 45 min (5-min increments)
Device Type	Bilevel Positive Airway Pressure (BiPAP) Device
Pressure Range	4-25 cm H2O
Humidification	Integrated HumidAir Humidifier
Sound Level	26 dBA
Power Supply	100-240V AC, 50/60Hz, 1.5A
Data Storage	SD card
Connectivity	Wireless
Compatibility	Compatible with ResMed mask systems