Need help?Do you have a question about the ResMed AirCurve 10 and is the answer not in the manual?
General| Sound Level | 26 dBA |
|---|---|
| Ramp Feature | Yes |
| Device Type | Bi-Level Positive Airway Pressure Device |
| Weight | 1248 g |
| Humidification | Integrated humidifier |
| Connectivity | SD card |
| Mode of Operation | S |
| Ramp Time | 0 to 45 minutes |
| Data Storage | SD card |
| Display | Color LCD screen |
| Compatibility | Compatible with masks |
| Power Supply | 100–240V AC, 50–60Hz, 2.0A |
Important safety warnings and precautions for using the device. Read before use.
Details the intended use for AirCurve 10 VAuto and AirCurve 10 S devices.
Lists pre-existing conditions where positive airway pressure therapy may be contraindicated.
Describes potential side effects that may arise during therapy and reporting procedures.
Detailed instructions for setting up the AirCurve 10 device and connecting components.
Important caution regarding overfilling the humidifier and potential water damage.
Instructions on how to start therapy, including mask fitting and device activation.
Procedures for stopping therapy, including manual and automatic methods.
Guide on how to access and view current settings within the My Options menu.
How to adjust the Ramp Time setting for comfortable therapy initiation.
Instructions on adjusting the humidifier's moisture output for comfort.
Guide on using the Mask Fit feature to check for mask leaks and ensure a good seal.
General advice on the importance of regular cleaning for optimal therapy.
Detailed steps for cleaning the humidifier, air tubing, and device exterior.
Step-by-step guide on how to replace the air filter in the device.
Important caution about using the humidifier on a plane due to turbulence risk.
Provides solutions for common problems like mask leaks, dry nose, and pressure issues.
Addresses issues such as black screen, device cooling, humidifier leaks, and data transmission errors.
Explains device messages like 'High leak detected' and 'Air tubing may not be connected properly'.
Covers warnings related to air tubing, power cord, device modification, water immersion, and oxygen use.
Details cautions on using approved parts, mask venting, placement, air inlet blockage, and cleaning solutions.
To Next Page
