ResMed S9 Series Quick Start Guide

S9 VPAP
™
Tx Lab System
QUICK START GUIDE
Table of Contents
Setting up the S9 VPAP Tx 2
Filling the H5i Water Tub 3
Navigating the Menus 3
Mask Fit 4
Mask Type and Tube Type Setting 4
Starting a Session in the Control Room 5
Disassembling the H5i Humidifier 6
Reassembling the H5i Humidifier 7
Air Tubing Disinfection Guide 8
H5i Disinfection Guide 9

ResMed S9 Series Specifications

General

Data Storage	SD card
Device Type	CPAP Machine
Pressure Range	4 to 20 cm H2O
Sound Level	24 dB
Power Supply	100-240V AC, 50/60Hz
Therapy Modes	CPAP, VPAP ST, VPAP Auto
Altitude Adjustment	Yes
Operating Temperature	+41°F to +95°F (+5°C to +35°C)
Operating Humidity	10% to 95% non-condensing
AC Voltage	100-240V AC
Humidifier	optional
Ramp	Yes