2.Press MHZ/SET key and rotate the coding knob to choose the needed frequency step size.
3.Press MHZ/SET key to save settings, or press any other key to cancel.
4.Press any key to exit menu mode, except MHZ/SET key.
Note: if an unmatched frequency step size with current operating frequency is changed, the mobile radio will automatically adjust operating
frequency to match with the new frequency step size.
Display Backlight Light Up Method
1.Press FUN, MHZ/SET key in turn, then rotate the coding knob to choose menu number 43 (LLIG).
2.Press MHZ/SET key and rotate the coding knob to choose AUTO, ON (default) or OFF.
Note: when using auto backlight, as soon as pressing front panel or microphone keys, display backlight lights up and remains for 5s.
• Coding control knob also can be locked. To continuously use coding control knob when the lock function is turned on, choose menu
number 26 (ENC) and choose ON.
• When the lock function is turned on, the mobile radio can’t be reset.
• The mobile radio’s operating mode can’t be switched through pressing (Power) + any key.
• Microphone PF key can be normally operated even the lock function is turned on.
Activate Coding Control Knob
1.Press FUN, MHZ/SET key in turn, then rotate the coding knob to choose menu number 26 (ENC).
2.Press MHZ/SET key and rotate the coding knob to choose ON or OFF (default).
3.Press MHZ/SET key to save settings, or press any other key to cancel.
4.Press any other key to exit menu mode, except MHZ/SET key.
Microphone PF Key
Many mobile radio settings can be set without using mobile radio keys or control knob. Microphone PF/D, MR/C, VFO/B and CALL/A can be
set as different mobile radio functions.
Default function of the microphone keys:
Microphone PF1 (PF/D) key: 1MHz step
Microphone PF2 (MR/C) key: memory call out
Microphone PF3 (VFO/B) key: VFO choice
Microphone PF4 (CALL/A) key: Call channel choice
Note: Menu number 38 (MC.L) must be set to "OFF" to program microphone keys
1.Press FUN, MHZ/SET key in turn, then rotate the coding knob to choose one of the menu numbers 26 -42 (PF1-PF4).
2.Press MHZ/SET key and rotate the coding knob to choose programmable functions.
3.Press MHZ/SET key to save settings, or press other key to cancel.
4.Press any key to exit menu mode, except MHZ/SET key.
Backlight Color Setting
Backlight color indicates mobile radio working status. Three kinds of backlight color working status can be set in advance: standby,
transmitting and receiving.
1.Press FUN, MHZ/SET key in turn, then rotate the coding knob to choose menu number 44 (WF.CLR), 45 (RX.CLR) and 46 (TX.CLR), and
set each status.
2.Press MHZ/SET key and rotate the coding knob to choose color kinds: 1, 2, 3, 4 (default), 5, 6, 7 and 8.
3.Press MHZ/SET key to save settings, or press other key to cancel.
4.Press any key to exit menu mode, except MHZ/SET key.
LCD Contrast Adjustment
1.Press FUN, MHZ/SET key in turn, then rotate the coding knob to choose menu number 47 (CONTR).
2.Press MHZ/SET key and rotate the coding knob to choose LCD contrast level: 0, 1, 2 (default) and 3.
3.Press MHZ/SET key to save settings, or press other key to cancel.
4.Press any key to exit menu mode, except MHZ/SET key.
Lock Function
Lock function can ban most keys to avoid activating one function accidentally.
1.Press FUN key for (1s).
♦ When the function is turned on, the screen displays .
• Following keys can’t be locked
(Power), FUN for (1s), Volume knob, PTT and microphone keyboard
2.Press FUN key for (1s) again to unlock keys.
Programmable Function
MONI: Monitor function on/off
ENTER: Input frequency or memory channel number through keyboard
1750: Transmit 1750Hz
VFO: Enter VFO mode
MR: Enter MR (memory call out) mode
CALL: Choose call channel
MHz: Enter 1MHz step mode
REV (Reverse frequency): Reverse frequency function on/off
SQL (Squelch): Enter squelch mode
M-V: Memory channel to VFO transmission
M.IN: Memory channel
C.IN: Memory call channel
MENU: Enter menu mode
SHIFT (Offset) : Offset function on/off
LOW: Choose transmitting power
LOCK: Lock function on/off (must press for 1s)
STEP (Step) : Choose frequency step size
Note: in addition to entering menu mode and choosing PF1-PF4, functions can be set by pressing the programmed PF key and turning on
the mobile radio. When programming PF key with the later method, rotate the coding control knob or press microphone UP/DWN key to
choose functions. Press any other key to exit menu mode, except MHZ/SET key.
17
To Next Page
Loading...
