Power Message
When turning on the mobile radio, power message is displayed and can be changed (up to 6 characters).
1.Press FUN, MHZ/SET key in turn, then rotate the coding knob to choose menu number 22 (P.ON.MSG).
2.Press MHZ/SET key and the screen displays power message and input cursor.
3.Rotate the coding control knob to choose bits.
• Following alphabet and number bits can be input: 0~9, A~Z, -- (dash), / ( slash) and blank.
• In addition to coding control knob, bits can be input with microphone keyboard.
4.Press MR key to move cursor to the next one.
• Press VFO key to move cursor to the former one. Press FUN key to delete characters of current cursor position.
5.Repeat step 3 and 4, up to input 6 characters.
6.Press MHZ/SET key to finish setting and save power message.
7.Press any other key to exit menu mode, except MHZ/SET and FUN key.
Note: if power message is not set, screen will display mobile radio battery voltage when the mobile radio is turned on.
Programmable VFO
To limit operating frequency within one frequency range, program higher and lower frequencies for VFO specifications. For example, lower
frequency chooses 462MHz and higher frequency chooses 468MHz. Adjustment range is from 462.000MHz to 462.000MHz.
1.In VFO mode, press FUN, MHZ/SET key in turn, then rotate the coding control knob to choose menu number 7 (PVFO).
• Screen displays the current programmable frequency range of the frequency band.
2.Press MHZ/SET key and rotate the coding knob to choose lower frequency (MHz).
3.Press MHZ/SET key and rotate the coding knob to choose higher frequency (MHz).
4.Press MHZ/SET key to save settings, or press any other key to cancel.
5.Press any other key to exit menu mode, except MHZ/SET key.
Note:
• ≤100KHz frequencies can’t be programmed.
• Higher frequency can’t lower than chosen lower frequency.
TOT
1.Press FUN, MHZ/SET key in turn, then rotate the coding knob to choose menu number 20 (TOT).
2.Press MHZ/SET key and rotate the coding knob to choose 3, 5 or 10 minutes (default).
3.Press MHZ/SET key to save settings, or press any other key to cancel.
4.Press any other key to exit menu mode, except MHZ/SET key.
Note: the mobile radio will make a warning beep sound even the menu number is set as OFF.
Microphone Keyboard Lock
Microphone Keyboard Lock bans microphone PF key and avoids changing mobile radio operations for accidentally pressing keys.
1.Press FUN, MHZ/SET key in turn, then rotate the coding knob to choose menu number 38 ( MC.L).
2.Press MHZ/SET key and rotate the coding knob to choose ON or OFF (default).
3.Press MHZ/SET key to save settings, or press any other key to cancel.
4.Press any other key to exit menu mode, except MHZ/SET key.
Voice Companding
Voice companding function can be turned on to reduce noise and improve voice quality.
1.Press FUN, MHZ/SET key in turn, then rotate the coding knob to choose menu number 49 (CPD).
2.Press MHZ/SET key and rotate the coding knob to choose ON or OFF (default).
• One mobile radio’s voice companding is turned on, the other needs to be turned on to ensure sound quality.
3.Press MHZ/SET key to save settings, or press any other key to cancel.
4.Press any other key to exit menu mode, except MHZ/SET key.
Scramble Voice Encryption
Five encryption items can be selected, you can define them to ensure private communication.
1.Press FUN, MHZ/SET key in turn, then rotate the coding control knob to choose menu number 50 (SR).
2.Press MHZ/SET key and rotate the coding knob to choose OFF (default), USER (define), 3450, 3400, 3300, 3200, 3100, or 3000Hz.
• Private communication between two mobile radios, specifications need to be set the same to ensure normal communication.
3.Press MHZ/SET key to save settings, or press any other key to cancel.
4.Press any other key to exit menu mode, except MHZ/SET key.
Speaker Turn On (SP unmute)
Speaker will be turned on when the mobile radio receives communication signaling. Opening conditions can be chosen.
1.Press FUN, MHZ/SET key in turn, then rotate the coding knob to choose menu number 59 (UNMUTE).
2.Press MHZ/SET key and rotate the coding knob to choose PTT ID types: QD (default), Q+0 or Q-0.
QD: Speaker will be turned on as soon as CTCSS/DCS signaling is right.
Q+0: Both the CTCSS\DCS signaling and the optional signaling (DTMF or MSK signaling) must be correct to turn on the horn.
Q-0: Turn on the horn whenever one of the CTCSS\DCS signaling, optional signaling (DTMF or MSK signaling) is correct
3.Press MHZ/SET key to save settings, or press any other key to cancel.
4.Press any other key to exit menu mode, except MHZ/SET key.
Roger Beep
The mobile radio will make a finishing prompt after transmitting when the function is turned on. Prompt will send to receiver to inform
receiver the communication ends.
Roger Beep ON/OFF
1.Press FUN, MHZ/SET key in turn, then rotate the coding knob to choose menu number 60 (TEND).
2.Press MHZ/SET key and rotate the coding knob to choose ON or OFF (default).
3.Press MHZ/SET key to save settings, or press any other key to cancel.
4.Press any other key to exit menu mode, except MHZ/SET key.
Roger Beep Volume Setting
Roger beep volume can be selected according to your need.
18
To Next Page
Loading...
