41
b Clean and dry the area where you will place the
electrode pads.
Attach the ends of the electrode pad to the
electrode cord.
See ‘What’s in the box?’ on page 4 to help identify the
parts.
Press the connectors firmly together .
c Making sure Revitive is switched o. Plug the other
end of the electrode cord into the electrode pad port
on the side of Revitive.
Plugging in the electrode cord will automatically
turn the foot-pads o.
d Remove the plastic liner from the electrode pads. Put
the liner to one side as you will re-use it aer the
session has ended.
e Press the electrode pads on your chosen area, as
shown on page 40 or the Thigh Pads as shown on page
44, gently pressing the adhesive side against the skin.
Using the Dual Mode Body Pads
To Next Page
Loading...
