22
23
j Press the (+) Intensity Control, one time, to
start stimulation.
Continue to increase the intensity until you can feel or
see the muscles in contract and relax. You can set the
intensity between 1-99.
You can use the buttons on the device or remote
control.
Press the (+) button to increase the level.
Press the (–) button to decrease the level.
k Press the (+) Intensity Control until it is at the
desired level.
Use an intensity that provides you with strong but
comfortable muscle contractions and note that the
intensity required may vary from day to day - eg using
it on 25 one day, does not necessarily mean you will
need to use if at 25 the next day. The required
intensity could be higher or lower than previous usage.
It is normal to feel tingling or varying sensations in
your calf muscles.
If you feel pain or discomfort - lower the intensity of
the body pads using either the (-) Intensity Control on
the control panel of the device or on the remote control.
l The time control/display will start to count down in
minutes as REVITIVE Medic cycles through its
program.
Instructions for use
m When REVITIVE Medic times out, the time display
reads 00 and you will hear three beeps.
n REVITIVE Medic switches itself off automatically.
o Ensuring that the device has switched itself off, then
gently peel the body pads from the skin.
Do not pull the body pads off the skin using the
body pad cords as this may damage the cords.
p Replace the body pads onto its plastic liner after use.
r Unplug the body pad cord from the opening
on REVITIVE Medic.
You do not need to detach the body pads from the
body pad cords.
To Next Page
Loading...
