Revv Owner’s Manual - 11
Master Volume Controls
The Generator is equipped with 2 MIDI programmable & foot switchable
master volume controls. These controls come right after the effects loop
& also work as the FX loop return control. These controls can be toggled
from one to the other for complete volume control & boosts.
Master volume #1 control is in use when the red “masters” LED is off.
Master volume #2 control is in use when the red “masters” LED is on.
The controls can be toggled via the front panel “masters” toggle switch,
the footswitch button #4 (or programmed bank) or a MIDI device.
2.5
To Next Page
Loading...
