Revv Owner’s Manual - 7
Channel One (Clean)
Selected by: 1) pushing the designated front panel momentary toggle
switch up, 2) footswitch button #1 or a footswitch preset mode setting,
3) MIDI & CC commands.
Passive treble, middle, & bass controls with a wide range. Small turns =
large tonal change!
Level (volume) controls both Clean & Crunch volume for well-balanced
operation.
Very clean (high headroom) & punchy. Takes pedals very well - or
decrease power to 10 watts for a more broken up sound with the
Output Power Switch. Channel output power is independent so you
can use this to control both tone & volume separately from the gain
channel.
2.2
To Next Page
Loading...
