Revv Owner’s Manual - 16
Rear Panel Layout
Main Power Connection
When plugging the amplifier into the mains A/C wall receptacle, always
make sure the amplifier power & standby switches are in the off position.
The Required voltage & fuse ratings are marked on the amplifier, verify
that they are correct before plugging in.
Main & HT Fuses
The mains fuse & HT fuse are in place to protect you & your amplifier
from overload conditions. Always replace them with the same type &
rating only! Always unplug the amplifier from the mains before replacing
the fuses. Fuse requirements are marked on the rear panel of the amplifi-
er.
3.0
3.1
To Next Page
Loading...
