Revv Owner’s Manual - 35
The following commands control functions that are turned on & off.
These functions require an on (0-63) & off (64-127) command (byte) to
be sent with the CC number to either turn them on or off. If you are trying
to use them & are not getting them to respond, chances are you are
sending the wrong command byte ( 0-63 is OFF & 64-127 is ON).
(Consult the Peripheral’s instruction manual)
Effects Loop: 26 – (0x1A)
Masters: 27 – (0x1B)
Fat: 28 – (0x1C)
Bright: 29 – (0x1D)
Mute: 30 – (0x1E)
To Next Page
Loading...
