Getting Started
21
© 2018
REXING All Rights Reserved
Removing the Memory Card
Before removing a memory card from your camera, you must first prepare it for
safe removal by powering down the device.
Removing a memory card from your camera:
1. Hold the Power button to turn the camera off.
2. Gently push the memory card in until you hear a click, and allow the spring
release to push the card out.
Do not remove the memory card while the device is transferring or
accessing information. Doing so can result in data loss or corruption, or
damage to the memory card or device. Rexing is not responsible for losses that
result from the use of damaged memory cards, including the loss of data.
Formatting the Memory Card
Using your camera to format a memory card:
1. Upon turning on the camera, tap the Record button to stop recording.
2. Tap the Settings button to access the Settings Menu.
3. Use the arrow keys to navigate to the "Format" option. Once this option is
highlighted, tap “Yes” to continue.
4. You will be asked to confirm your choice. Tap “OK” to confirm.
Before formatting your memory card, always remember to back up any
important data stored on the device. The manufacturer’s warranty does not
cover loss of data resulting from user actions.
It’s recommended that you format your memory card after transferring
To Next Page
Loading...
