Rexing M1 - Camera Settings Configuration; Exposure, Time Lapse, and G-sensor Settings; Parking Monitor and Screen Saver Settings

Settings
25
© 2018 REXING All Rights Reserved
Exposure
Default Setting: 0
Manually adjust the exposure to brighten or darken recordings. Positive values
brighten recordings, while negative values darken them.
Time Lapse
Default Setting: off
Time lapse function automatically takes photos at specified intervals and edit
them together to a video clip so they can play much faster than real time..
G-sensor Sensitivity
Default Setting: Normal
In the event of an accident, an automatic file lock will be placed on the current
video, preserving your most crucial footage. Locked videos can be found on the
memory card under the “Lock” folder.
Note: Locked video files will not be overwritten by Segment Recording, they will
remain on the memory card until they are manually deleted, or when the card is
formatted.
Parking Monitor
Default setting: Off
When this function is enabled, the camera will automatically enter parking mode
whenever it is shut down. When parking mode is enabled and a collision is