20
© 2015
REXING
A
ll Righ
ts
Re
s
er
v
ed
.
Getting Started
Installing your V1 Dashboard Camera
Installation
Video guide: video.rexingusa.com
1. Attaching the camera to the window mount
Before the device can be used in a car, it is essential to first install a properly
attached window mount. Make sure that you place the recorder in a safe,
appropriate location where it will not obstruct the driver’s view.
2. Inserting a memory card
You will need to insert a memory card before you can begin recording. The
recorder supports MicroSD cards with a capacity of up to 32GB. For reliable
operation, use a Class 10 memory card with a capacity of at least 8GB.
3. Connecting the charger to the car's 12V DC outlet
Be sure to connect only the Rexing-approved charger designed and supplied
specifically for use with your device. Using an incompatible charger can
cause serious personal injury or damage to your device.
DO NOT insert or remove a memory card while the device is in operation.
To Next Page
Loading...
