Rexing V1 - Turning Device On and Off

26
© 2015 REXING A ll Righ ts Re s er v ed .
Operating your V1 Dashboard Camera
Turning the Device On and Off
Turning the Device On and Off
Press and hold the ON/OFF button for a few seconds to turn on the device.
A welcome message will be displayed onscreen as shown in the image below.
To turn off the device, again press and hold the ON/OFF button for a few
seconds. A goodbye message will be displayed onscreen as shown in the
image below.
Note: The V1 Dashboard Camera will switch on and off automatically if you
keep it permanently connected to the car charger.