Rexing V1 - Operating Your V1 Dashboard Camera; Playback Mode (Video)

39
© 2015 REXING A ll Righ ts Re s er v ed .
Operating your V1 Dashboard Camera
System / Video Settings
Playback Mode
You can play back recorded video on your device using the following steps:
1. Press REC to stop recording
2. Press MODE twice to switch from Recording to Playback Mode
3. Press and hold the UP or DOWN button to navigate through the stored video
files
4. Press OK to start playback for the selected video
5. Press OK again to pause playback
6. Press MODE to stop playback
7. FAST FORWARD: While video is playing, press the UP button one or more
times to set fast playback speed (2X / 4X / 8X)
8. FAST REWIND: While video is playing, press the DOWN button one or more
times to set reverse playback speed (-2X / -4X / -8X)