Rexing V1 - Screen Saver; Gps

37
© 2015 REXING A ll Righ ts Re s er v ed .
Operating your V1 Dashboard Camera
System / Video Settings
Screen Saver
Recommend setting: 15 Seconds
Select a time duration for the screen to stay lit after recording starts.
(If you cannot find this option, please follow instructions for installing the latest
firmware update, page 48.)
1. Press MENU twice to enter System Settings
2. Press the UP or DOWN button to navigate to the "Screen Saver" option
3. Press OK to view the current selection: 15 Secs / 1 min / 3 min / OFF
4. Press the UP or DOWN button to make your selection
5. Press OK to confirm your entry
6. Press MENU to exit System Settings
Alternatively, you can use a hot key shortcut for this feature. During Recording
Mode, press and hold OK to turn the LCD screen on or off.
GPS
Select GPS speed unit (GPS Logger required)
1. Press MENU twice to enter System Settings
2. Press the UP or DOWN button to navigate to the "GPS" option
3. Press OK to view the current selection: KM/H / MI/H / OFF
4. Press the UP or DOWN button to make your selection
5. Press OK to confirm your entry
6. Press MENU to exit System Settings