Rheem IKONIC RTGH-SR11i - User Interface and Options

IKONIC Tankless Water Heater Service Manual
18
This Tankless water Heater has the Liquid Crystal Dis-
play (LCD) on the user interface.
This user interface allows you to adjust the water tem-
perature and view the operating status or error codes.
GENERAL INFORMATION
1.4 LCD ON THE USER INTERFACE
SETTINGS
BACK ENTER
STATUS SERVICE MODE
SET POINT
UNLOCK / LOCK (HOLD 3 SEC)
Warning
Blower On
Recirculation On
Screen Lock
Burner On
Status
Icons
Set Point
Temperature
Control
Button
Indicator
Icons
Control
Buttons
Cloud Connectivity
Wi Fi
Diagnostic
1.4.1 SETTING TO ENABLE/DISABLE TO WATER HEATER
This tankless water heater can set the enable/disable mode with the Liquid Crystal Display (LCD) on the User Inter-
face.
1. Press the “MODE” button. After the LCD displays
“ENABLE/DISABLE”, press the “ENTER” button.
2. The factory setting is “DISABLE”. Press the “▼” or
“▲” button to select “ENABLE” or “DISABLE” and
press the “ENTER” button.
To exit this setting, press "BACK" button until initial
screen is displayed.
SETTINGS
BACK ENTER
STATUS SERVICE MODE SETTINGS
BACK ENTER
STATUS SERVICE MODE
DISABLEENABLE/DISABLE
SETTINGS
BACK ENTER
STATUS SERVICE MODE SETTINGS
BACK ENTER
STATUS SERVICE MODE
DISABLEENABLE/DISABLE