Rheem Raypak AVIA 264 - Preparing the Unit for Connection; Add a New Heater to Raymote

52
3. Open the Raymote mobile app and log in with your
user name and password. See Figure 77.
Figure 77. Log in the Raymote Mobile App
Preparing the Unit for Connection
1. Stand near the display of the AVIA unit. Press the
CONNECT key. See Figure 78.
Figure 78. CONNECT Key
2. The CONNECT menu should display the Wi-Fi State,
indicating "Ready to Config" wireless connection,
and also the HOTSPOT identifier. See Figure 79.
Figure 79. Wi-Fi Ready to Congure and HOTSPOT
Identier
3. At this point your unit is ready for connection.
NOTE: The following sections provide the instructions for
Android and iPhone devices.
Add a New Heater to Raymote
1. In the Raymote app, press the menu button
located at the top left corner of the screen, then press
"+ Add new device". See Figure 80.
Figure 80. Add New Device
ADD THE FIRST UNIT
OR ADD MORE NEW UNITS