57
5. On the top left corner of the screen, press the
"Settings" button to go the Settings menu. See
Figure 91.
Figure 91. Select "Settings" Menu
6. Select the Wi-Fi network on the Settings menu.
Figure 92. Select "Wi-Fi" Settings
7. Select the HOTSPOT identifier that matches the
unit’s Touchscreen as shown in Figure 93.
Figure 93. Select the HOTSPOT Identier
8. A notification tab will confirm that iPhone is now
connected to the unit. Press the notification tab or
manually go back to the Raymote mobile iPhone app
to continue. See Figure 94.
Figure 94. Connection Notication
9. The Raymote mobile app will provide the Wi-Fi
network credentials to your unit.
Figure 95. Conguring Device
To Next Page
Loading...