Need help?Do you have a question about the RIAN NDS3542A and is the answer not in the manual?
General| Model | NDS3542A |
|---|---|
| Category | Media Converter |
| Fiber Type | Single-mode/Multi-mode |
| Wavelength | 1310nm/1550nm |
| Transmission Distance | 550m (Multi-mode) |
| Power Supply | DC 5V |
| Operating Temperature | 0°C to 50°C |
| Humidity | 5% (non-condensing) |
All-in-one devices integrating encoding and modulation for V/A signals into RF output.
Details the product's key features, including video encoding, resolution, inputs, and technical specifications.
Illustrates the schematic overview, principle chart, and typical applications of the encoder modulator.
Provides illustrations and descriptions of the encoder modulator's front and rear panels and their controls.
Covers general handling precautions, power safety, installation steps, and environment requirements.
Details environmental conditions, including space, humidity, temperature, and essential grounding procedures.
Provides an overview of the device's LCD menu structure and navigation for settings.
Details settings for modulating parameters (Output A/B) and IP output configuration.
Describes the start-up sequence and how the device displays its initial status, frequency, and bitrates.
Explains how to access the main menu and configure general settings, including input encoding parameters.
Details how to set video format, bitrate, and audio format for input programs.
Covers settings for modulator parameters like bandwidth, constellation, and transmission mode for Output A/B.
Explains modulation settings: Constellation, Transmission Mode, Guard Interval, and Code Rate.
Details RF frequency, output level, RF enable settings, and ASI output configuration.
Explains how to connect to the device's web NMS port and log in using default credentials.
Describes the welcome interface, status information, and configuration of Input 1 via the web.
Details how to configure Input 2 and manage ASI input programs through the web interface.
Explains managing input programs for ASI, including passthrough, multiplexing, and selection.
Guides on setting up PID pass-through and configuring the NIT table for programs.
Details inserting NIT information and configuring LCN (Logical Channel Number) for programs.
Covers configuring multicast IP output addresses and setting modulator parameters via web.
Details modulator settings and how to save or restore device configurations.
Explains how to reboot the device and update its firmware using the web interface.
Details how to configure the device's network settings like IP address, subnet mask, and gateway.
Covers changing the login password and managing device configuration backups and loads.
Details the procedure for backing up and loading device configurations using the web interface.
Provides preventive measures for operation and conditions requiring power cord disconnection.
Illustrates DVB-T/ISDB-T distribution examples for residences, private homes, and outside broadcast.
Shows DVB-T/ISDB-T distribution examples for hotels, cinemas, and company audio/video content.
Lists the items included in the package, such as the modulator, manual, cables, and power cord.
Details the capabilities of encoding and modulation modules used in the encoder/modulator series.
To Next Page