Richter RR35 - DAB Menu and Functions; Full Scan; Manual Tune

11
MODEL: RR35
11. DAB menu
This allows you to tailor the DAB radio with a variety of options to suit
you. Press and hold the ‘Mode/Menu’ button until enter menu mode.
Using ‘- Station +’ button, press ‘-’ or ‘+’ button to select option.
Press ‘Mode/Menu’ to take a step back within the menu. You can exit the
Menu by pressing and holding the ‘Mode/Menu’ button.
Menu options in DAB mode:
• Full scan
• Manual tune
• DRC
• Prune
• System
• Info
12. Full scan
In DAB menu, using ‘- Station +’ button to select ‘Full scan’ and press the
‘Select’ button once to conrm, then full scan starts automatically. Once
a scan is completed, the radio returns to play the previously selected
station or rst station on the station list.
NOTE: If no radio station is found, it shows ‘No DAB Station’.
For a better reception, extend the antenna or do the full scan again in
another place.
13. Manual scan
As well as the normal method of scanning, you can also manually tune
to a particular channel/frequency. This can be useful for adjusting your
antenna to achieve the best possible reception and scanning a particular
channel to update the station list.
In DAB menu, using ‘- Station +’ button to select ‘Manual tune’ and press
the ‘Select’ button once to conrm. Then press ‘- Station +’ button again
to select a particular channel/frequency and press the ‘Select’ button
once to conrm the setting.
The display shows a live indication of the received signal strength on the
selected frequency. Adjustments to your antenna will be manifested in
the received signal strength displayed.