SUNRISE ALARM CLOCK DIGITAL RADIO
16
29. Scan behavior
By default, press and hold ‘Select’ button for 2 seconds in FM radio
mode, you can search an available station, and stay on the station.
If you select ‘Auto’, press and hold ‘Select’ button for 2 seconds in FM
radio mode, it will automatically full scan and store stations into preset
station list.
Options:
• Manual (default)
• Auto
Press ‘- Station +’ button to select particular option in ‘Scan behavior’
and press the ‘Select’ button once to conrm the change to new setting.
Troubleshooting
PROBLEM SOLUTION
FM Hiss / DAB
Burbling /
intermittent
Usually due to low signal strength.
Check / move antenna.
Move radio. Rescan local (high-strength) stations
only. (For DAB, check local coverage at
www.digitalradioplus.com.au “Can I Get DAB+
Digtal Radio’ then rescan stations).
DRC not working DRC only works if it is enabled by the broadcaster
for a specic station.
DRC is not broadcast or enabled in Australia.