7
MODEL: RR35
Basic Operation
1. Standby mode*
Connect DC power adapter, the radio will enter standby mode.
Display will show the time and date information after synchronize
to station signal.
*Standby mode will only work when DC power adapter is connected.
Switch between Standby, DAB and FM mode
Long Press the Power/Snooze button to turn on the radio. It will enter
radio mode.
Press the ‘Mode/Menu’ button to toggle between DAB and FM mode.
Long Press the Power/Snooze button to return to standby mode.
2. Alarm Setting
This Digital Clock radio includes dual alarms and can be activated
together for 2 different alarm settings (Alarm1 and Alarm 2) or you may
wish to activate one alarm at a time. Once an alarm is activated you will
nd the alarm icons displayed on the front display.
To set alarm, rst make sure to set the clock.
NOTE: You have approximately 60 seconds between each selection
before the alarm is automatically cancelled by the clock radio and you
have to start again.
3. Alarm Set Up
Long Press Power/Snooze to turn the Clock Radio on.
To set Alarm 1, press ‘Alarm 1’ button or set Alarm 2, press ‘Alarm 2’
button. The alarm icon
or will ash.
Press the ‘Select’ button to setup the alarm, then the screen shows
‘Alarm 1 Wizard’ or ‘Alarm 2 Wizard’.
Press ‘- Station +’ button to set hour part of alarm time, and then press
the ‘Select’ button to conrm.
Press ‘- Station +’ button to set minute part of alarm time, and then press
the ‘Select’ button to conrm.
To Next Page
Loading...