Richter RR35 - Stopping and Switching Off Alarms; Sleep Timer Function; Display Dimmer Function

9
MODEL: RR35
5. Stop alarm
You can stop the alarm by pressing the ‘Alarm 1’ or ‘Alarm 2’ button
when alarms sounds.
6. Switch alarm off
Press the ‘Alarm 1’ or ‘Alarm 2’ button. The alarm icon
or will ash.
Press ‘- Station +’ button to set alarm state ‘Off’, and then press ‘Select’
button to conrm.
It will display ‘Alarm Saved’. The alarm icon
or will disappear from
display.
7. Sleep
This enables your radio to switch to standby mode by itself after a set
sleep time.
Press ‘Sleep’ button repeatedly to select a sleep time, and then press
‘Select’ button to conrm. The sleep icon
will show on the display.
Sleep time options: off/15/30/45/60/90 minutes.
After setting the sleep time, you can view the sleep time countdown by
pressing ‘Sleep’ button.
Press ‘Sleep’ button repeatedly to select ‘Sleep off’, and then press
‘Select’ button to turn off sleep timer.
8. Dimmer function
The brightness of the display can be adjusted manually with the ‘-
Dimmer +’ buttons on the rear panel.
There are a total of 5 levels of light intensity.
Press ‘Dimmer -’ button once to decrease the level by 1 step.
Press ‘Dimmer +’ button once to increase the level by 1 step.