EasyManua.ls Logo

Richter RR40 - Troubleshooting Common Issues; FM Hiss and DAB Performance; Bluetooth and Sound Problems

Richter RR40
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
DAB/FM/Bluetoo clock radio
FM: Hiss Low signal
streng
Check/move antenna
Move radio
Rescan local (high-streng) stations only
DAB+: Burbling/intermittent cut-out
DAB+: ‘No station available’
message
Low signal
streng
Check/move antenna
Move radio
Rescan local (high-streng) stations only
Visit www.digitalradioplus.com.au to see if your area
receives “good” DAB coverage.
Unable to pair wi a Bluetoo
device
- Check at your radio is in Bluetoo mode, check
at ‘Bluetoo’ is displayed and also ensure at e
device you are trying to pair has Bluetoo switched
on.
- Ensure at you are wiin range of e radio for
Bluetoo functionality (less an 10 meters, line of
sight).
- Ensure at any previously ‘paired’ devices have
been disconnected.
- If possible, turn off oer nearby Bluetoo devices
or disable eir Bluetoo functionality.
No Sound
Adjust e volume using e rotary control.
- You may have headphones connected. Eier use
e headphones to listen to your radio or unplug e
headphones.
- Check at e mains power lead is connected at
e back of e radio and e mains power wall
socket is switched on.
- You may need to re-scan if e station you last
listened to is no longer available.
TROUBLE SHOOTING
Problem Cause Solution