• Internet Fax is performed using Memory Transmission, which automatically starts transmission after
storing documents in memory. If you switch the type of transmission to Internet Fax while the machine
is in Immediate Transmission mode, the transmission mode is automatically switched to Memory
Transmission.
1. Press [Internet Fax] to switch the transmission type to Internet Fax.
2. Specify the sender.
For details, see “Sender Settings”.
3. Press [Manual Entry].
4. Enter the Internet Fax destination, and then press [OK].
If you enter an incorrect character, press [ ], [ ], [Backspace], or [Delete All]. Then, re-enter the
characters correctly.
1. Transmission
86
To Next Page