Ricoh Aficio 2035 - Edit; Edit 2; 2

Accessing User Tools (Copier/Document Server Features)
95
4
v Priority Setting: Reduce
You can set the ratio with priority
when [Reduce/Enlarge] is pressed,
followed by [Reduce].
Note
r Default:
•Metric version: 71%
• Inch version: 73%
v Ratio for Create Margin
You can set a Reduce/Enlarge ra-
tio when registering Create Mar-
gin in a shortcut key.
Note
r Default: 93%
v R/E Priority
Specifies which tab is given priori-
ty on the display panel when [Re-
duce/Enlarge] is pressed.
Note
r Default: Reduce
Edit
1
/
2
Note
r Enter the width of the binding
margin with the number keys as
follows:
• Metric version: 0–30 mm (in in-
crements of 1 mm)
• Inch version: 0"–1.2" (in incre-
ments of 0.1 inch)
r Enter the width of the erased mar-
gin with the number keys as fol-
lows:
• Metric version: 2–99 mm (in in-
crements of 1 mm)
• Inch version: 0.1"–3.9" (in incre-
ments of 0.1 inch)
v Front Margin: Left/Right
You can specify left and right mar-
gins on the front side of copies in
Margin Adjustment mode.
Note
r Default:
• Metric version: Left 5 mm
• Inch version: Left 0.2"
v Back Margin: Left/Right
You can specify left and right mar-
gins on the back side of copies in
Margin Adjustment mode.
Note
r Default:
• Metric version: Right 5 mm
• Inch version: Right 0.2"
v Front Margin: Top/Bottom
You can specify top and bottom
margins on the front side of copies
in Margin Adjustment mode.
Note
r Default:
• Metric version: Top/Bottom 0
mm
• Inch version: Top/Bottom 0.0"
v Back Margin: Top/Bottom
You can specify top and bottom
margins on the back side of copies
in Margin Adjustment mode.
Note
r Default:
• Metric version: Top/Bottom 0
mm
• Inch version: Top/Bottom 0.0"
All manuals and user guides at all-guides.com