Copier Functions
45
2
r When placing an original on the
exposure glass or in the ADF us-
ing Batch mode, press the {#}
key after all the originals have
been scanned.
Originals and copy orientation
You can select the orientation.
•Top to Top
• Top to Bottom
Note
r You can change the default orien-
tation with User Tools. See p.92
“Copy Orientation in Duplex
Mode” and p.92 “Original Orienta-
tion in Duplex Mode” .
A Press [Dup./Combine/Series].
B Press [Orientation], select the orien-
tation (Original/Copy), and then
press [OK].
One-Sided Combine
Combine several pages onto one side
of a sheet.
v 1 Sided 2 Pages → Combine 1 Side
Copies 2 one-sided originals to one
side of a sheet.
v 1 Sided 4 Pages → Combine 1 Side
Copies 4 one-sided originals to one
side of a sheet.
v 1 Sided 8 Pages → Combine 1 Side
Copies 8 one-sided originals to one
side of a sheet.
v 2 Sided 1 Page → Combine 1 Side
Copies 1 two-sided original to one
side of a sheet.
v 2 Sided 2 Pages → Combine 1 Side
Copies 2 two-sided originals to
one side of a sheet.
v 2 Sided 4 Pages → Combine 1 Side
Copies 4 two-sided originals to
one side of a sheet.
v Orientation of the original and image
position of combine
Open to left R originals
Duplex1
Duplex2
GCSHVY7E
GCSHUY1E
To Next Page
Loading...
