Ricoh Aficio 2035 - Changing a Stored Program; Deleting a Program; Recalling a Program

Copying
74
2
F Press [OK].
When the settings are successfully
stored, m appears on the left side
and the program name appears on
the right side of the registered pro-
gram number. The display returns
to the initial copy display for a
while.
Changing a Stored Program
A Check the program settings.
Note
r When you want to check the
contents of a program, recall the
program. See p.74 “Recalling a
Program”.
B Repeat steps A to D of “Storing a
Program”.
C Press [Register].
Repeat steps E, F of “Storing a Pro-
gram”.
Note
r When it is overwritten, the pre-
vious program is deleted.
Deleting a Program
A Press the {Program} key.
B Press [Delete].
C Press the program number you
want to delete.
D Press [Yes].
The program is deleted, and the
display returns to the initial copy
display.
Recalling a Program
A Press the {Program} key.
B Press [Recall].
C Press the program number you
want to recall.
The stored settings are displayed.
Note
r Program numbers with m
against them already have set-
tings in them.
D Place the originals, and then press
the {Start} key.
All manuals and user guides at all-guides.com
all-guides.com