Copying
64
2
Note
r You cannot use the bypass tray
with this function.
Reference
Related initial settings
p.100 “Font”
p.100 “Size”
p.100 “Superimpose”
p.100 “Stamp Position”
“Timer Settings”, General Settings
Guide
A Press [Edit/Stamp].
B Press [Stamp].
C Press [Date Stamp].
D Press [All Pages] or [1st Page only] to
select the print page.
Note
r You can change the font and po-
sition of the date to be stamped.
See p.64 “To change the style of
date”.
E After all settings are complete,
press [OK].
F Press [OK].
G Place your originals, and then
press the {Start} key.
To change the style of date
A Press [Change Format].
B Select the date format, and then
press [OK].
To change the stamp position
A Press [Change].
B Select the desired date stamp po-
sition, and then press [OK].
To Next Page
Loading...
