Troubleshooting When Using the Copy Function
12
2
Reference
p.6 “When You Have Problems Operating the Machine”
Max. number of
sets is nn
The number of copies exceeds the
maximum copy quantity.
You can change the maximum
copy quantity. See “Copier Fea-
tures”, General Settings Guide.
Cannot copy.
Original is be-
ing scanned by
another func-
tion.
The scanner function is in use. Cancel the current scan job. To do
this, press the {Clear/ Stop} key on
the scanner screen to display the
message “
Clear/Stop key
was pressed. Stop scan-
ning?
”, and then press [Stop].
You do not have
privileges to
use this func-
tion.
The use of this function is restrict-
ed to authentified users only.
Contact the administrator.
Authentication
failed.
The entered login user name or
password is not correct.
Ask the administrator for the correct
login user name and password.
Authentication
failed.
Cannot access the authentication
server when using Basic Authenti-
cation, Windows Authentication ,
LDAP Authentication, or Integra-
tion Server Authentication.
Contact the administrator.
Message Cause Solution
To Next Page
Loading...
